April 3, 2020
  • 5:53 pm Joe Biden to address impeachment and Trump-Ukraine whistleblower call , live stream
  • 5:53 pm President Trump’s 2020 State of the Union address and the Democratic response (FULL LIVE STREAM)
  • 5:53 pm Video – Need help? Call Blue Card Services!
  • 5:53 pm Temple University Student’s Viral Tik Tok Video Calling North Philadelphia ‘The Ghetto’ Causes Outra
  • 4:52 pm @TorontoPolice News Conference Re: Homicide #54/2016 Jarryl Hagley, 17 | Fri Oct 21st, 1pm


You can connect to an incoming call received
on your telephone using the handset, speakerphone, or headset. If a headset is connected to the
unit, then you must press the speaker button to answer the call. You can also set the auto
answer feature to answer an incoming call automatically. And the telephone also allows
you to reject anonymous calls or calls from specified numbers. Upon completion of this
module, you will be able to answer an incoming call on your telephone, receive a call using
the auto answer feature, reject a call, reject anonymous calls, and reject specific calls. Here is the procedure to answer incoming calls
using the handset. 1. Click the handset to go off-hook to answer the call. 2. Click the
handset to go on-hook and end the call. Click the handset to go off-hook. Click the handset
to go on-hook and end the call. You can enable the auto answer feature on
your telephone to answer an incoming call automatically. This is also a useful feature
for people who have difficulty using their hands or fingers, or who are visually impaired.
The call will be connected after a programmed number of rings. 1. Click [AUTO ANSWER] in
stand-by mode until ‘Auto Answer On’ appears on the display. When auto answer is enabled,
you will see the message “AUTO ANSWER” on the display in stand-by mode. 2. When you
receive a call on your telephone, it will be connected after a programmed number of
rings. Here, the call is connected after one ring. Click the ‘Speaker’ button to end the
call. 3. To disable auto answer, in stand-by mode click the [AUTO ANSWER] button until
‘Auto Answer Off’ appears on the display. You can enable the auto answer feature on
your telephone to answer an incoming call automatically. The call will be connected
after a programmed number of rings. To auto answer a call: Click [AUTO ANSWER] in stand-by mode to enable
the auto answer feature.Click [SP-PHONE] to end the call. Click [AUTO ANSWER] in stand-by
mode to disable the auto answer feature. Note: When auto answer is enabled, AUTO ANS
appears on the display in stand-by mode. If you are busy and do not want to answer
the call, you can press the ‘Reject’ soft button to reject the call. When a call is
received, the ‘Reject’ soft button may not display depending on the line an incoming
call is arriving on. 1. Click the ‘Reject’ soft button to reject the incoming call on
your telephone. When call is rejected, it is indicated as a missed call on the display. Click Reject to reject the incoming call on
your telephone. Note: Depending on the line an incoming call
is arriving on, the Reject soft button may not display. The telephone has an option to let you reject
anonymous calls. If somebody calls without sending caller ID, the caller will be automatically
redirected to a voice message and asked to enter the caller ID manually, so the call
will be routed to you if it is somebody that you know. You must configure the settings
for rejecting anonymous calls through the Web user interface. You require a User name
and a Password to log in to the Web user interface. For details, consult your administrator. 1.
Click the ‘Telephone’ tab. 2. Click [Line 1] under ‘Call Control’. 3. Click the highlighted
radio button to enable the ‘Block Anonymous Call’ feature under ‘Call Features’ settings.
4. Click ‘Save’. You can see the message ‘Complete’ on the Web user interface screen. Now, if
you receive an anonymous call on your telephone it will get blocked. You can set the unit to reject calls when
the unit receives a call without a phone number. To reject anonymous calls:
Click the [Telephone] tab. Click [Line 1] under ‘Call Control’. Click the highlighted
radio button to enable ‘Block Anonymous Call’. Click Save. Note: Rejected phone numbers will not be stored
in the incoming call log. You can set your telephone to reject calls
from up to thirty telephone numbers. The numbers you have set for rejection will not be stored
in the incoming call log. However, depending on the line on which an incoming call is received,
it may not be rejected. 1. First, click the ‘Setting’ soft button. 2. Here, you can use
the [Up] or [Down] navigator key to select ‘Call Block’. Click the [Up] navigator key
to select ‘Call Block’. 3. Next, click [ENTER]. 4. Now, click the ‘Add’ soft button. 5. Click
the highlighted dial keys to enter the telephone number ‘103’. 6. Click the [ENTER] button.
When [ENTER] is pressed, you will hear a beep sound as a confirmation that the entered number
is saved in the rejection list. To register additional telephone numbers, press the ‘Add’
soft button again and repeat the steps as explained. You can set your telephone to reject calls
from specific phone numbers. To add a number to the rejection list:
ClickSetting. Click the [Up] navigator key to select ‘Call Block’. Click [ENTER].
Click Add. Click the highlighted dial keys to enter ‘103’. Click [ENTER]. Note: You can store a maximum of 30 phone
numbers you want to reject in the rejection list of the unit. Rejected phone numbers will
not be stored in the incoming call log. Depending on the line an incoming call is arriving on,
the call may not be rejected. You can store a telephone number in the rejection
list of the unit from the incoming call log. 1. Click the ‘Call Log’ soft button. 2. Here,
the ‘Incoming call log’ is selected by default. So, click [ENTER] to view it. 3. Click the
[Down] navigator key to select the number ‘101’. 4. Then, click the Save soft button.
5. You can press the [Up] or [Down] navigator key to select ‘Call Block’. Here, click the
[Down] navigator key to select ‘Call Block’. 6. Next, click [ENTER]. 7. To enable or disable
the ‘Call Block’ feature, select the ‘Yes’ or ‘No’ option using the [Up] or [Down] navigator
key.
Here, click the [Up] navigator key to select ‘Yes’. 8. Click [ENTER]. The selected
number will be added to the rejection list. To add a number from the incoming call log
to the rejection list: Click Call Log. Click [ENTER] to view the
incoming call log list. Click the [Down] navigator key to select the number ‘101’. Click Save.
Click the [Down] navigator key to select ‘Call Block’. Click [ENTER]. Click the [Up] navigator
key to select the option ‘Yes’. Click [ENTER] to save the selected number in the rejection
list of the unit. To add a number from the incoming call log
to the rejection list: Click Call Log. Click [ENTER] to view the
incoming call log list. Click the [Down] navigator key to select the number ‘101’. Click Save.
Click the [Down] navigator key to select ‘Call Block’. Click [ENTER]. Click the [Up] navigator
key to select the option ‘Yes’. Click [ENTER] to save the selected number in the rejection
list of the unit. You can delete a number that is stored in
the call rejection list of the unit. 1. First, click the ‘Setting’ soft button. 2. You can
press the [Up] or [Down] navigator key to select ‘Call Block’. Here, click the [Up]
navigator key to select ‘Call Block’. 3. Next, click [ENTER]. 4. Now, click the [Down] navigator
key to select the phone number ‘101’. 5. Click the ‘Erase’ soft button. 6. Click the [Up]
navigator key to select the option ‘Yes’ to confirm. 7. Click [ENTER]. The selected number
is deleted from the rejection list. To delete a number from the call rejection
list: Click Setting. Click the [Up] navigator key
to select ‘Call Block’. Click [ENTER]. Click the [Down] navigator key to select the phone
number ‘101’.Click Erase. Click the [Up] navigator key to select the option ‘Yes’. Click [ENTER]. Hello I am Randy Dell, owner of Affordable
Communications and we are authorized Panasonic dealer, NEC channel reseller, and LG-Ericson
Elite Partner. We have tried to simplify phone system operation and training with these,
easy to follow videos. Our goal is to improve our customers� experience with their phone
system, whether they have a digital phone, or a VoIP phone. We�ll be adding new content
often, so subscribe to our channel so that you don�t miss anything. We�ve served the Las Vegas and Henderson
area since 1992 with our motto �We do it right the first time,� and we pride ourselves
on finding the best possible solution for every customer. If you�re the owner of a business, in need
of telecommunication services, voip service, business voip, or you just want to reduce
your long distance expense with free voip calls. If you are overwhelmed selecting a
VoIP provider, or just need help with your telephone directory listing, please give us
a call or visit our web site, at www.affordablecomm.com.

Robin Kshlerin

RELATED ARTICLES
LEAVE A COMMENT